Bomford Arm Mowers
Bomford has a flail mower for your needs. From traditional three point hitch mounts to front mounts and folding front and rear mount models are available.
Bomford Flailbot Robotic Mower
Flailbot is Bomford’s wirelessly operated track mower for challenging terrains that offers the ultimate remotely controlled mowing capability with zero operator risk.
Covering challenging, steeply inclined terrain with a traditional man-on-board power mower puts a driver at risk. Remotely controlled wirelessly, Flailbot provides ultimate mowing capability whilst keeping the operator at a safe distance.
CTVM
Developed to meet the demands of local authorities for parks and municipal areas when grass cutting, the CTVM has a cutting width of 1.6m variable cutting height from 8mm to 130mm, a mountable kerb height of 355mm, sealed bearings, pressed scoop flails and weights in at 300kg allowing the flail mower to work in different conditions, both on and off road.
Bomford CTVM Mower Features:
- 1.6m cutting width
- Shaft Driven
- 32 Scoop Flails
Bandit
The Bandit trailed flail mower is aimed at professional users where efficiency and finish are a must.
Bomford Bandit Mower Features:
- 1.5m, 1.8m and 2.25m cutting widths
- Fixed with roller as standard
- Variable cutting height
- Cat II three point linkage
- 540 or 1000 rpm PTO speeds
Turbo Elite / Euro / Open
The Turbo Mower Elite, Euro, Open and Pro range offers operators a huge choice of cutting widths to fit every job from pasture topping to simple grounds maintenance at very cost effective prices.
Bomford Turbo Mower Features:
- 1.3m, 1.5m, 1.9m, 2.25m, 2.3m, 2.45m, 2.5m, 2.7m and 2.8m cutting widths
- Front Mount Option
- 1.3m and 1.5 Manual Offset
- Hydraulic offset standard on 1.9m and above
Turbo VM
The Turbo VM flail mower is specifically designed for verge mowing over long sustained periods.
Bomford Turbo VM Mower Features:
- 1.6m and 2.0m cutting widths
- Plus 90 deg to minus 50 deg cowl angling
- Direct drive through twin pivoting gearboxes
- 750mm offset
- Cat II three point linkage
Turbo Mower Offset
The Turbo Mower Offset range offers operators a choice of cutting widths at cost effective prices.
Bomford Turbo Mower Offset Features:
- 1.6m, 1.9m and 2.25m cutting widths
- Three-point linkage-mounting
- PTO overrun protection
- Choice of whale-tail or J flails
- 155 degrees of head movement
Raptor
The Raptor range of flail mowers is the ideal choice for users who have a dedicated shoulder mowing operation to perform, and is ideal for set aside topping or ground maintenance.
Bomford Raptor Mower Features:
- 1.3m, 1.5m, 1.9m, 2.25m, 2.3m, 2.45m, 2.5m, 2.7m and 2.8m cutting widths
- Front Mount Option
- 1.3m and 1.5 Manual Offset
- Hydraulic offset standard on 1.9m and above